Sanskrithi

1. Project at a glance

Project identity

Land and geographic identity

Development identity

Offering and status

2. The project story

SANSKRITHI is registered as a residential project in Gopanpalle, Nizamabad District, on land identified in the project records as Survey Nos. 209 and 318. The filed plan describes a gated housing layout with 33 dwelling units, arranged as individual named villa buildings rather than a tower apartment scheme. The RERA-filed inventory lists 1BHK, 3BHK and 4BHK configurations, as well as VILLA NO 01. RERA record RERA unit table

The building permit sanctions the 33-unit development on 20,536.24 sq.m. Its building schedule includes mostly two-level homes (Ground Floor + 1 Floor), four buildings with a stilt and two floors, and one ground-floor building. The permit also specifies parking area, internal roads, open space, utility land and tot-lots. These are features of the filed approval, not confirmation that they have been completed or are operational.

The project is registered through 12/11/2028, while the building permit gives a completion-before date of 12/11/2028 and the project header records a proposed completion date of 12/03/2029. No independently verified site-progress information or occupancy certificate is supplied; the status should therefore be understood as approved/registered, with construction progress and completion not established here. RERA record

3. Master plan, architecture & building design

The filed plan presents a 20,536.24 sq.m “Layout With Housing And Gated Community,” with a draft-layout category. Its land-use schedule allocates 11,258.82 sq.m to plotted area, 6,656.91 sq.m to roads, 2,411.06 sq.m to organized open space and 208.77 sq.m to utility area. The plan records no amenities-plot area, social-infrastructure area, common-parking area, buffer area or green-belt area in its land-use table.

The project is shown as 33 residential buildings, each with one dwelling unit in the approval schedule. Most are Ground Floor + 1 Floor; VILLANO-24, VILLANO-27, VILLANO-29 and VILLANO-15 are identified as 1 Stilt + 2 Floors, and VILLANO-18 as Ground Floor. The plan gives a proposed height of 9.7 m from ground level for the listed stilt-and-two-floor buildings; individual heights and gross/net built-up figures are also recorded for a number of buildings. The supplied record does not provide a single aggregate gross-built-up figure in the drawing extraction.

The RERA filing states approved built-up area of 11,258.82 sq.m. This is not the same measurement category as the building-specific gross and net built-up-area figures in the plan; no FSI-counted area or RERA-filed carpet-area schedule is supplied. RERA filing

The plan identifies internal approach roads, including 12.19 m, 10.42 m and 12.01 m widths, and lists existing and proposed 12.00 m roads. It also records four tot-lots with areas 53.9 sq.m, 1,184.77 sq.m, 995.56 sq.m and 230.73 sq.m, along with utility provisions.

4. Homes, configurations & floor plans

RERA-filed unit counts and saleable areas are shown below. Booked and available counts are the portal extract’s figures; no as-of date accompanies them. The supplied RERA record does not give carpet areas for these configurations. RERA unit table

The approved drawing software measurement identifies one 2BHK floor-plan design with measured carpet area 233.6 sq.m (median/minimum/maximum), or 2,514 sq.ft. This is a software measurement from drawing geometry, not a RERA-filed configuration or area disclosure, and the measurement is marked as needing review. The drawing extraction supplies room labels and some dimensions, including a hall, drawing room, bedroom, puja, toilet, dress, dining, guest room and kitchen/store; the room schedule is not a substitute for a verified area statement. Floor plans RERA unit details

Carpet area, saleable area and common-area loading are different measures. The supplied materials do not provide a complete unit-by-unit carpet-area schedule or loading figures; the drawing measurement should be checked against the source plan.

5. Parking & vehicle circulation

The approved building permit records total parking area of 1,115.08 sq.m. The plan’s project-level parking figure is also 1,115.08 sq.m, and its conditions state that approved cellar/stilt parking areas are to be used exclusively for vehicle parking. The permit extraction does not provide a total number of car or two-wheeler spaces, visitor or accessible-space counts, or unit-specific parking allocations.

The plan shows internal roads and approach-road widths including 12.19 m, 10.42 m and 12.01 m. No separate parking-allotment schedule or evidence that any drawn bay is exclusively assigned to a particular home is supplied.

6. Amenities, recreation & open spaces

The following are facilities or areas recorded in the RERA-filed plan or portal amenity list. The portal shows 0% progress for listed amenities; this is not a verified completion inspection. The vendor’s separate promotional amenity list is not treated here as a RERA-declared or sanctioned delivery schedule. RERA amenities

7. Utilities, building services & safety

The RERA amenity record lists water supply, sewerage (including chamber, lines, septic tank and STP), storm-water drains, treatment and disposal of sewage and sullage water, energy management, electrical meter room/sub-station/receiving station, and fire-protection and fire-safety requirements. These are recorded as provisions; the portal’s amenity progress is 0%, and no completion inspection or capacity details are supplied. RERA amenities

The building permit also calls for a transformer space, garbage house and rainwater-harvesting structure, and requires a completion notice and occupancy certificate before occupation. It states that public utility connections, including water supply and electricity, are provided only on production of an occupancy certificate.

The filed plan lists EV charging infrastructure and dual piping among its amenities/utilities, but the supplied record does not establish installation or operational status. No capacities for water storage, treatment, sewage treatment, electrical backup, lifts, fire systems, CCTV, access control or accessibility features are supplied.

8. Location, access & connectivity

The official project location in the RERA certificate is Gopanpalle, NIZAMABAD RURAL (NEW), Nizamabad District, PIN 503002. The approval documents describe the site as Pangra, Gopanpally, Bypass Road, Nizamabad, and identify the project land by Survey Nos. 209 and 318.

The filed plan identifies existing and proposed road connections and internal approach roads of 12.19 m, 10.42 m and 12.01 m. A supplied location record gives an approximate distance of 123.0 km to the nearest sampled Outer Ring Road interchange; no other verified distances or travel times are supplied. Location record

9. Developer & development status

The registered promoter is SRI VENKATESWARA CONSTRUCTIONS, identified as a partnership, with GSTIN 36ADWFS4130J1ZL. The supplied promoter address is Residence, Greenpark, On Bypass Road, Goopanpalle, NIZAMABAD RURAL (NEW), Nizamabad, 503002. The supplied record names Vaishnavi Reddy Admala and Pallavi Loka as authorized signatories. Corporate record Parties record

The building permit identifies Nizamabad Municipal Corporation as the issuing authority and records the approved development as 33 dwelling units. Construction progress is not independently established by the supplied evidence. The permit states construction was to commence before 11/05/2026 and be completed before 12/11/2028; the RERA certificate’s registration validity runs to 12/11/2028, while the project header separately records proposed completion 12/03/2029. No occupancy certificate is supplied. RERA record

The RERA-filed Form B affidavit contains a promoter declaration regarding title, encumbrances and project undertakings, but its completion-period statement is truncated in the supplied extraction. A separate affidavit dated 17-Feb-2026 states that a supplementary agreement concerning villa share holdings was in progress and undertakes to complete, execute and register it within 30 days; the supplied extraction does not establish that this later step was completed.

10. Approvals, official records & documents